Sehen Sie, wie die Multiphysik-Simulation in Forschung und Entwicklung eingesetzt wird
Ingenieure, Forscher und Wissenschaftler aus allen Branchen nutzen die Multiphysik-Simulation, um innovative Produktdesigns und -prozesse zu erforschen und zu entwickeln. Lassen Sie sich von Fachbeiträgen und Vorträgen inspirieren, die sie auf der COMSOL Conference präsentiert haben. Durchsuchen Sie die untenstehende Auswahl, verwenden Sie die Schnellsuche, um eine bestimmte Präsentation zu finden, oder filtern Sie nach einem bestimmten Anwendungsbereich.
Sehen Sie sich die Kollektion für die COMSOL Conference 2024 an
Printed circuit heat exchanger (PCHE) is a key component in many energy and power systems, such as concentrated solar power plant, nuclear power plant, aircraft, etc. In this paper, the thermal and fluid performance of a lab-scale PCHE is analyzed using COMSOL Multiphysics® simulation ... Mehr lesen
“页岩气革命”使美国成功摆脱了对他国能源的严重依赖，目前我国页岩气的勘探开发也已取得了突破性成果，但是随着页岩气的开发，仍存在三大问题困扰着科学工作者和现场工程师：（1）页岩气开发过程中的渗透率演化规律尚未摸清；（2）在产气过程中，页岩气在产量上往往呈现出不确定性；（3）缺乏针对页岩气进行历史拟合和产量预测的数学工具。针对以上三个主要问题，我们定义非常规储层固有渗透率的演化是裂隙和基质之间物质传输和应力传递的结果，并建立了离散体模型研究孔隙变形与流体流动之间的耦合作用；以此为基础，我们建立双基质双重孔隙介质模型（连续介质模型）研究页岩基质变形与流体流动之间的耦合关系 ... Mehr lesen
Corrosion is an ongoing issue in metallurgic field. Stainless-steel products are likely to corrode in certain environmental conditions, especially if they are exposed to marine environment where localized corrosion can occur. The aim of this work is to study the behavior of 316L grade ... Mehr lesen
COMSOL® models have been developed for teaching gas absorption fundamentals. Model results are compared to environmentally significant experimental results for removing CO2 and SO2 from air using water as solvent. For concentrated gas mixtures, the models are shown to be equivalent to ... Mehr lesen
In 2016 the group of experimentalists from the Institute of High Current Electronics (Tomsk, Russian Federation) have been discovered a novel phenomenon related to atmospheric plasma jets that was called an “apokamp” (originated from Greek words “off the bend”). This new plasma jet ... Mehr lesen
Introduction Steam reforming of natural gas has been the most common method for producing synthesis gas (CO + H2) for the production of H2, MeOH and NH3 for over half a century [1]. Production of H2 in the USA using steam methane reforming (SMR) is ca. 9 MM tons/yr. Global production ... Mehr lesen
Within the ENHANCE European project, hybrid energy harvesters have to be designed and developed to supply small and autonomous sensors in automobiles. The focus of this work is particularly related to the harvesting of energy from the vibration of the vehicle and from the high ... Mehr lesen
The anode baking process has gained significant attention since the 1980s due to its importance in Aluminium industry. A good anode baking process strives to achieve multiple goals including reduction of NOx from emissions. NOx generation is mainly due to the high-temperature ... Mehr lesen
A general purpose stainless steel micro reactor setup for methane conversion is being designed for research purposes. We intend to design and build a modular device that would be able to manage different types of reactions depending on the installed modules. The device should be able to ... Mehr lesen
Emily Nelson received her PhD in Mechanical Engineering from the University of California at Berkeley. She is a senior research engineer at NASA Glenn Research Center and specializes in the formulation and solution of problems in microgravity science, multiphase flow, porous media, risk ... Mehr lesen