Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Simple 3D Plane Wave (RF module)

Please login with a confirmed email address before reporting spam

Dear Community,

As a first step to a more complex problem, I would like to model a simple 3D electromagnetic plane wave.

To do so I tried the following:
- draw a simple box, set material as air
- define 2 opposing faces as ports. The wave should be propagating normal to the port surface so I define Ex0=Ez0=0 and Ey0=1 for TE polarization and enter the propagation constant as being the wavevector corresponding to my desired frequency.

QUESTION 1: Is it sufficient to only enter the desired frequency implicitly here? Or will it be overwritten by some global default definition? I got the impression that upon changing the propagation constant the wavelength in the solution did not change at all.

- define periodic boundary conditions on the remaining 4 sides of the box

QUESTION 2: How should this be done? I tried Continuity and Floquet periodicity but neither of the two converged.

Thanks.

0 Replies Last Post 21.08.2015, 05:34 GMT-4
COMSOL Moderator

Hello PD

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.