Discussion Forum

Forum Home

New Discussion

New Discussion

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

comsol 3.5a (version 3.5.0.608) with matlab 7.10.0 (version R2010a) under linux 64bit

Posted 28.07.2010, 10:43 GMT-4 4 Replies

Andrea Mazzalai

Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Good evening,

when I try to run comsol in matlab mode I get the following message in the matlab window:

??? Undefined function or method 'comsolmexpath' for input arguments of type
'char'.

So I applied the patch following instructions reported in this page:

www.comsol.com/support/updates/comsol35a3/

But patch didn't work. I got these error messages in the console output:

andrea@imxlcpc30:/usr/local/comsol35a$ sudo patch -p1 < /home/andrea/Desktop/comsol_3.5.0.608-p3_linux.patch
patching file bin/comsol
patching file mli/multiphysics/comsol.m
Hunk #1 FAILED at 23.
1 out of 1 hunk FAILED -- saving rejects to file mli/multiphysics/comsol.m.rej
patching file mli/multiphysics/comsolmexpath.m
Hunk #1 FAILED at 8.
1 out of 1 hunk FAILED -- saving rejects to file mli/multiphysics/comsolmexpath.m.rej
patching file mli/multiphysics/initcomsol.m
Hunk #1 FAILED at 8.
Hunk #2 FAILED at 32.
Hunk #3 FAILED at 43.
3 out of 3 hunks FAILED -- saving rejects to file mli/multiphysics/initcomsol.m.rej

I did everything with root privilegies.

Does anybody know which could be the problem?

Thanks a lot

Best regards

4 Replies Last Post 06.10.2010, 02:37 GMT-4

Zhe Wang

Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago

Hi, I have the same problem as you. Have you fixxed it?

Reza Pourabolghasem

Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago

I executed the command:

patch -Rf -p1 < [download file path]/comsol_3.5.0.608-p3_linux.patch

and I got similar errors. Then I thought maybe that's why the instructions to apply this command had a ">/dev/null" at the end. So, I just disregarded the errors and executed the second command:

patch -p1 < [download file path]/comsol_3.5.0.608-p3_linux.patch

Then I ran comsol and it worked without any errors. It connected to matlab 2010a with no errors as well.

Zhe Wang

Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago

thank you for updating.
I use comsol on Windows platform.
Is there any patch?

Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago

Hi

check the main web site, or ask your local rep, that is the best and quickes ;)

--
Good luck
Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL^® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content