Menu

Discussion Forum

New Discussion
Filtern

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

helix3 in Comsol 4 with Matlab

Posted 07.07.2010, 04:23 GMT-4 LiveLink for MATLAB 6 Replies

Roland Ernst
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

Does anybody know how it is possible to import a helicoidal "helix3" object from Matlab to Comsol 4.0a? This was very easy to do with Comsol 3.5a (create a helix3 object under Matlab and then just import this object in Comsol 3.5a) but with Comsol 4.0a the same method seems no longer possible.
Thanks for any help about that!

Roland
6 Replies Last Post 01.11.2010, 06:11 GMT-4
Alexandre Savard
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 19.07.2010, 10:40 GMT-4
I would also be very interested in knowing that. Anyone has any idea?
I would also be very interested in knowing that. Anyone has any idea?
Magnus Ringh COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 20.07.2010, 02:53 GMT-4
Hi,

The helix commands are not included in version 4.0, which is stated in the Release Notes for version 4.0a. For the upcoming version 4.1, the ability to create helices will be available not only through a command but also as a built-in geometric primitive that you can add to the geometry sequence directly in the COMSOL Desktop environment.
In the meantime, a workaround is to create the helix using 3.5a and then import the geometry into 4.0.

Best regards,
Magnus Ringh
COMSOL AB
Hi, The helix commands are not included in version 4.0, which is stated in the Release Notes for version 4.0a. For the upcoming version 4.1, the ability to create helices will be available not only through a command but also as a built-in geometric primitive that you can add to the geometry sequence directly in the COMSOL Desktop environment. In the meantime, a workaround is to create the helix using 3.5a and then import the geometry into 4.0. Best regards, Magnus Ringh COMSOL AB
Alexandre Savard
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 20.07.2010, 07:59 GMT-4
Thank you for the answer. That's really appreciated.
Thank you for the answer. That's really appreciated.
Michael Reilly
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 16.09.2010, 10:53 GMT-4
when will 4.1 be released? I need those features approximately yesterday.
when will 4.1 be released? I need those features approximately yesterday.
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 16.09.2010, 12:03 GMT-4
Hi

then if I where you, I would construct it in a CAD tool

--
Good luck
Ivar
Hi then if I where you, I would construct it in a CAD tool -- Good luck Ivar
Brian Clarkson
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 01.11.2010, 06:11 GMT-4
Thanks for the guidance - just tried it in 4.1 and it's a breeze...
Thanks for the guidance - just tried it in 4.1 and it's a breeze...

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content