Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Rigid connector: applying moment in (degree/s)?
Posted 13.02.2015, 17:05 GMT-5 Structural Mechanics Version 4.4 0 Replies
Please login with a confirmed email address before reporting spam
I am working on modeling a cylinder in 3D using a time dependant solver and applying a torsinal load on the geometry. The way I have it set up is at one end of the cylinder I have a fixed constraint boundary condition and am twisting it at the other end. I am using a rigid connector -> applied moment and everything seems to be working well using N*m values. However, the ASTM standard that I am working with is calling for a 5 deg/min load and I have no idea how to make this work.
1. Can I input a 5 deg/min load in my model using a rigid connector (or any other physics module)?
2. I would like to graph Torque (N*m) v.s. Rotation (deg) at a point on my geometry, can this be done?
So far I've managed to make this model work (time dependent) with an applied moment load of 5*t [N*m].
Any help would be greatly appreciate!
Thanks,
Chris
Hello Christel Italiaie
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.