Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Proton exchange membrane Fuel Cell (inquiry)
Posted 05.12.2014, 13:07 GMT-5 Battery Design, Geometry, Mesh Version 4.4 0 Replies
Please login with a confirmed email address before reporting spam
i have some questions about the PEM fuel cell.
1) how can i change the porosity, density, temperature and velocity (profile velocity along the x-axis) and if i changed them what is effect and the results that i will get ?
2) about the chemical equation why it is only valid for 25 C ?
3) what are the equations that is used in the model of the species transport in the GDL's of a PEM ? and why did we use these equations ?
4) why do we use the mesh ? and why did we use the tetra mesh in this model ? how many type of mesh do we have ? and what is mesh sensitivity ?
5) how can i put dimensions on the model ?
please answer these questions if you can :D , thanks in advance.
best regards.
Attachments:
Hello Mohammed Alaasi
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.