Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
how to set the contact pair correctly?
Posted 11.07.2014, 05:00 GMT-4 Geometry, Materials, Modeling Tools & Definitions, Parameters, Variables, & Functions, Studies & Solvers, Structural Mechanics Version 3.5a 0 Replies
Please login with a confirmed email address before reporting spam
So when i set it, what i need exactly?
I set my boundary condition about which place get received some force.
And i set the contact pair.
there are 3 parts in my modeling. one of them is located between 2 wide plates.
and the upper and bottom plate are getting together to center to push the middle one.
So i set 2 pairs for contact. but there is some error..
I wonder how to set exactly..........
So in order to move the plates to center, i have to set something except setting for force??
just i set the force as 2000N...
please give me some advice.
Hello Jihwan Yu
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.