Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Regarding geometry resolution

Please login with a confirmed email address before reporting spam

Hi,

I am building geometry of a wire 10 m long and with 1 mm radius. However, wire's shape is not cylindrical it is rectangular prism, even though I build cylinder. But when change the length of the wire to 0.1 m it becomes cylindrical. I guess this problem is related with the resolution, therefore, can you help me change the resolution or suggest other solution to this problem? Comsol file of my wire is attached.

Regards,
Akim


2 Replies Last Post 13.06.2014, 04:05 GMT-4

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 11.06.2014, 09:51 GMT-4
Dear Akim,

I had a similar problem (poor graphical resolution). I increased the graphical "Detail" from "Normal" to "Fine", this solved my problem (you need to restart comsol 4.4 ):
- File -> Preferences->Graphics and Plot Windows -> Details

Hope it will help you !
Dear Akim, I had a similar problem (poor graphical resolution). I increased the graphical "Detail" from "Normal" to "Fine", this solved my problem (you need to restart comsol 4.4 ): - File -> Preferences->Graphics and Plot Windows -> Details Hope it will help you !

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 13.06.2014, 04:05 GMT-4
Dear Filippo,

Thank you!
Dear Filippo, Thank you!

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.