Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
MHD pump
Posted 26.03.2010, 16:08 GMT-4 1 Reply
Please login with a confirmed email address before reporting spam
I´m modeling a MDH pump with magnets end electrodes but i can´t put the Lorentz force im simulation. I used 2 electrodes and 2 magnets and in the middle of them i put a tunnel with salt water.The magnets are perpendicular to the electrodes. The model is sketched below (2D). V0=Voltage applied
--------------------------------------------------------
---------------------------------------Magnet------------
---------------------------------------------------------
_________
------------------------------------|tunnel of | -----------------
------V0=positive Electrode-----|salt water|-Electrode V0=negative
------------------------------------|________|---------------
-------------------------------------------------
--------------------------------------Magnet
-------------------------------------------------
The interaction between the magnets field, electrical field and the conductor fluid should create de Lorentz Force that would push the liquid ahead. But i don´t see anything. The Fluid pass through the tunnel as if there no magnetic and electrical fields and Lorentz force. I would be grateful if someone helpe me.
Hello Luciano Aoki
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam
i'm doing a similar project in comsol v4.3. you might have already completed your project.can you send me any sample models,please?
I'm finding it difficult to link the mef and laminar physics.
please help.
regards
Sapna