Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
mphglobal in magnetic field
Posted 16.10.2013, 10:51 GMT-4 Low-Frequency Electromagnetics Version 4.2a 1 Reply
Please login with a confirmed email address before reporting spam
Hi all,
I have made a Magnetic Bearing model in Comsol Multiphysics 4.2a and I saved it as M-File. I ran it in MATLAB R2011a but the mphglobal command didn't allow me to evaluate the global variables defined in COMSOL.
Below I show you the MATLAB error message:
Error in ==> experiment at 223
A=mphglobal(model,'qx');
where qx is the global variable defined in COMSOL...
Could you please tell me what is the reason of this error?
Thank you very much,
Daniele
I have made a Magnetic Bearing model in Comsol Multiphysics 4.2a and I saved it as M-File. I ran it in MATLAB R2011a but the mphglobal command didn't allow me to evaluate the global variables defined in COMSOL.
Below I show you the MATLAB error message:
Error in ==> experiment at 223
A=mphglobal(model,'qx');
where qx is the global variable defined in COMSOL...
Could you please tell me what is the reason of this error?
Thank you very much,
Daniele
1 Reply Last Post 17.10.2013, 06:45 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
If qx is indeed a global variable then the call to mphglobal should work. Can you post your model here (or send it to support)?
Lars Gregersen
Comsol Denmark
If qx is indeed a global variable then the call to mphglobal should work. Can you post your model here (or send it to support)?
Lars Gregersen
Comsol Denmark