Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
absolute thermal conductivity [K/W]
Posted 30.09.2013, 09:23 GMT-4 0 Replies
Please login with a confirmed email address before reporting spam
on 2D model, i would like to evaluate absolute thermal conductivity [K/W] of an air gap. model is attached. the idea is to give a heat source through the air gap, and 'measure' the temperature difference.
abs. thermal conduchtivity = delta-Temperatur[K] / heat source [W]
So on lower boundary (4) is "boundary heat source 1" applied and uppest boundary at 20°C cooled. heat source 100 W and thicknes 0.01[m]. the average temperatur on lower boundary of air gap evaluate using aveop1 and upper boundary of air gap used aveop2 and aveop3.
To have the heat source i need (intop1(ht.Qbtot)*0.01[m]). the Qbtot are integrated through the boundary length and multiplied with thicknes 0.01[m].
i still doubt it and really need input whether it's right or wrong.
thank you of any comments
regards
akmal
Attachments:
Hello akmal
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.