Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Optimize time of simulation
Posted 20.08.2013, 15:23 GMT-4 Low-Frequency Electromagnetics Version 4.3a 0 Replies
Please login with a confirmed email address before reporting spam
I'm simulating a grounding system with AC/DC model of COMSOL v4.3 and having trouble with simulation time.
I use more than 100 probes and constant time step. In the initial micro seconds the simulation time is about 1us per hour, but when the simulation reaches 10us each 1us takes about 10hours.
In the output I need only results of 3 probes, and the other probes are used just for simulation progress but not for post processing. I think the problem with simulation time is that when the simulation reaches more time there are many unnecessary data stored that slows the process.
How can I speed up my simulation? Is it normal to increase time simulation of each time step even with constant time step?
Hello Rafael Antônio Coelho
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.