Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
induction heating
Posted 26.07.2013, 08:27 GMT-4 Low-Frequency Electromagnetics Version 4.3b 2 Replies
Please login with a confirmed email address before reporting spam
Hello every body,
I want to know if it is possible to measure the impedance of a charge in induction heating process.
I can have lot of informations on the coil parameters (Icoil, Pcoil, Zcoil...) but how can I access to these informations on the charge?
Anyone have a idea?
Thank you very much
Julien
I want to know if it is possible to measure the impedance of a charge in induction heating process.
I can have lot of informations on the coil parameters (Icoil, Pcoil, Zcoil...) but how can I access to these informations on the charge?
Anyone have a idea?
Thank you very much
Julien
2 Replies Last Post 30.07.2013, 05:54 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Julien,
an impedance is a ratio of field quantitites, in the electromagnetic case this is voltage / current (applicable for lumped components like the coil) or electrical field / magnetic field (applicable for materials with wave propagation far away from boundaries).
This way you can calculate a wave impedance for the material, similar to the way the wave impedance for free space (377 Ohm) is determined.
Have a look at en.wikipedia.org/wiki/Wave_impedance or into a textbook.
Cheers
Edgar
--
Edgar J. Kaiser
emPhys Physical Technology
an impedance is a ratio of field quantitites, in the electromagnetic case this is voltage / current (applicable for lumped components like the coil) or electrical field / magnetic field (applicable for materials with wave propagation far away from boundaries).
This way you can calculate a wave impedance for the material, similar to the way the wave impedance for free space (377 Ohm) is determined.
Have a look at en.wikipedia.org/wiki/Wave_impedance or into a textbook.
Cheers
Edgar
--
Edgar J. Kaiser
emPhys Physical Technology
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Thank you very much Edgar,
I can try to make my simulation with mef in order to have access to the calculation of the electric field
After that I can calculate
Z=E(x)/H(x) on the different geometries of the model
Best regards Julien
I can try to make my simulation with mef in order to have access to the calculation of the electric field
After that I can calculate
Z=E(x)/H(x) on the different geometries of the model
Best regards Julien