Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Help for my case!
Posted 06.05.2013, 21:03 GMT-4 Fluid & Heat Version 4.3a 2 Replies
Please login with a confirmed email address before reporting spam
Hi, I am new to Comsol, and I want to simulate a water droplet falling down and pass through the 2mm gap between two circle particles. (see attached file)
the important thing is that I have to consider the surface tension of the droplet and see the droplet pass through the gap.
As the level set of Comsol can consider the surface tension, can I use this model (2D->fluid Flow->multiphase Flow->
two-phase flow,level set) to simulate this process.
and I don't know how I simulate a droplet falling down? anybody can give me some idea to simulate this process thanks lot!
the important thing is that I have to consider the surface tension of the droplet and see the droplet pass through the gap.
As the level set of Comsol can consider the surface tension, can I use this model (2D->fluid Flow->multiphase Flow->
two-phase flow,level set) to simulate this process.
and I don't know how I simulate a droplet falling down? anybody can give me some idea to simulate this process thanks lot!
Attachments:
2 Replies Last Post 07.05.2013, 02:53 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
check the model library, there should be a oil drop in water or the opposite, else inspire yourself from the capillary force example
--
Good luck
Ivar
check the model library, there should be a oil drop in water or the opposite, else inspire yourself from the capillary force example
--
Good luck
Ivar
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
thanks Ivar suggest me this great example, which gave me a good start!