Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
silencer duct
Posted 03.05.2013, 09:31 GMT-4 Acoustics & Vibrations Version 4.3a 1 Reply
Please login with a confirmed email address before reporting spam
Hi
I want to simulate insertion loss for ventilation ducts. I need to define inlet and outlet pressure so i can calculate insertion loss by its difference.
There is a similar sample "perforated muffler" for this situation.
there is a definition for acoustic power
P_in = intop_in(2*p0^2/(2*acpr.rho*acpr.c)) Total acoustic power at the inlet
P_out = intop_out(2*p*conj(p)/(2*acpr.rho*acpr.c)) Total acoustic power, outlet
TL 10*log10(P_in/P_out) Transmission loss
Are these formulas suitable for calculating sound pressure or i need to use anything else?
Regards
I want to simulate insertion loss for ventilation ducts. I need to define inlet and outlet pressure so i can calculate insertion loss by its difference.
There is a similar sample "perforated muffler" for this situation.
there is a definition for acoustic power
P_in = intop_in(2*p0^2/(2*acpr.rho*acpr.c)) Total acoustic power at the inlet
P_out = intop_out(2*p*conj(p)/(2*acpr.rho*acpr.c)) Total acoustic power, outlet
TL 10*log10(P_in/P_out) Transmission loss
Are these formulas suitable for calculating sound pressure or i need to use anything else?
Regards
1 Reply Last Post 20.05.2013, 03:21 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
There is also a model called "Absorptive Muffler" that employs the same solution, it works fine as far as I know.
--
Hope this helps
--
/RVN
--
Hope this helps
--
/RVN