Menu

Discussion Forum

New Discussion
Filtern

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

doubt in nonlinear solver - reg.

Posted 22.04.2013, 03:33 GMT-4 Low-Frequency Electromagnetics Version 4.3a 1 Reply

Karuppasamy Periyasamy
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Dear sir/mam,
currently I am working with AC/DC module of comsol 4.3a. I have to solve the model for my nonlinear BH data. In solver >> stationary solver>>linearity we have an option to change nonlinearity. But it did not change the result. what we have to do to solve the model for nonlinaer BH curve.
1 Reply Last Post 22.04.2013, 05:24 GMT-4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 22.04.2013, 05:24 GMT-4
Hi

You need to define a new Linear material for the non linear Iron, then use your BH curve for the B to H link (or the H to B depends how you have set up your model, check the doc)

There should be a good model library example in there somewhere ;)

--
Good luck
Ivar
Hi You need to define a new Linear material for the non linear Iron, then use your BH curve for the B to H link (or the H to B depends how you have set up your model, check the doc) There should be a good model library example in there somewhere ;) -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content