Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Heat transfer from the pipe to surroundings
Posted 13.04.2013, 03:30 GMT-4 Fluid & Heat, Computational Fluid Dynamics (CFD), Modeling Tools & Definitions, Parameters, Variables, & Functions, Results & Visualization, Studies & Solvers Version 4.3a 1 Reply
Please login with a confirmed email address before reporting spam
We found three options for "Wall Heat transfer" in "Non-Isothermal Pipe Flow" namely
1. Temperature (nitf/nitf)
2. Temperature (nipfl/nipfl)
3. Userdefined. (with an option to check "Take average in adjacent domains)
Can we know what does each of the above mean and what difference it is going to do to the heat transfer from the flow through pipes??
Please login with a confirmed email address before reporting spam
from my understanding when COMSOL proposes more than "user defined" in a given entry it's because it has detected one or several dependent variables in other existing physics, that have the same dimensions (in your case T temperature), and proposes that you link in one of them, instead of defining yourselff a scalar or a field value
Check yourmodel, how many T have you defined ?
--
Good luck
Ivar