Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Flow dependence on coordinate system?
Posted 19.03.2013, 17:48 GMT-4 Fluid & Heat Version 4.3a 1 Reply
Please login with a confirmed email address before reporting spam
I am working on modeling fluid structure interaction, and I have found that the flow changes whenever I move my model to a different location on the coordinate system. I literally selected everything and just moved it (nothing in my actual model changed) - so there seems to be a dependence upon the r-axis. Any ideas how to overcome this? Thanks!
1 Reply Last Post 20.03.2013, 04:25 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi Kim,
I assume you do not have any term (body force, buoyancy,etc...) which depends on coordinate system.
So, the dependence is due to the mesh, which is the only thing that changes while you "move" your models.
Try to work with a simpler model using structured grid. Moving this model keeping exactly the same mesh your results won't change. If they do, than my first assumption is wrong ;-)
Hope it helps,
Mattia
I assume you do not have any term (body force, buoyancy,etc...) which depends on coordinate system.
So, the dependence is due to the mesh, which is the only thing that changes while you "move" your models.
Try to work with a simpler model using structured grid. Moving this model keeping exactly the same mesh your results won't change. If they do, than my first assumption is wrong ;-)
Hope it helps,
Mattia