Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Creating a Point source in 3-5a
Posted 06.03.2013, 15:52 GMT-5 0 Replies
Please login with a confirmed email address before reporting spam
The tutorial can be found at www.atomic.physics.lu.se/fileadmin/atomfysik/Biophotonics/Education/MultiphysicsExercise.pdf
The part I am stuck at is 5.2.2.4 Helmholtz Equation (hzeq) ->Assign a point source
"A light source is needed and we have mentioned before that the point placed
in the [material] should be for this purpose. Right click the PDE (hzeq) menu item and then Points >
Point Source.
- Point selection: In the drawing window mark the point using the mouse so that it changes
color. In the Point selection tab click the ”plus sign”. A number will then appear in the point
selection tab, e.g. 5 but the numbering depends on how the coordinate system is defined.
- Source term: Assign a value in [W], e.g. f=0.1 for 100 mW.
The physics parameters are all set, now we need to create the mesh. "
If anyone could help me translate this part to a 3.5a instruction it would be very helpful.
Hello Ken Thomas
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.