Menu

Discussion Forum

New Discussion
Filtern

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Grain Modeling

Posted 27.02.2013, 02:22 GMT-5 Geometry, Materials, Modeling Tools & Definitions, Parameters, Variables, & Functions, Structural Mechanics Version 4.2a, Version 4.3, Version 4.3a 3 Replies

Yash Mathur
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

In ComSol 4.2 how can we give different crystal to different grains Please suggest any method , as I am able to change crystal orientation of whole model but not of each boundary unit separately.
Please guide me with it.
3 Replies Last Post 18.03.2013, 15:04 GMT-4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 27.02.2013, 04:35 GMT-5
Hi

you need to define a coordinate per "domain" so if you have N "grains" you need N domains and either N coordinates, or a random function and an general expression reproducing the N changes for the N domains

I do not see any other way, if I have interpreted your question correctly ;)

--
Good luck
Ivar
Hi you need to define a coordinate per "domain" so if you have N "grains" you need N domains and either N coordinates, or a random function and an general expression reproducing the N changes for the N domains I do not see any other way, if I have interpreted your question correctly ;) -- Good luck Ivar
Yash Mathur
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 18.03.2013, 11:52 GMT-4
Hi Ivar
I have to import an Image to a 2D file and than pursue an extrapolation to 3D.
Can you please guide me with the same.

Regards
Yash
Hi Ivar I have to import an Image to a 2D file and than pursue an extrapolation to 3D. Can you please guide me with the same. Regards Yash
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 18.03.2013, 15:04 GMT-4
Hi

in COMSOl 3D you can ad a workplane and import a 2D file format into this workplane, then extrude that in the Z directin (all to the same height though). Check which 2D file format your version of COMSOl can accept

--
Good luck
Ivar
Hi in COMSOl 3D you can ad a workplane and import a 2D file format into this workplane, then extrude that in the Z directin (all to the same height though). Check which 2D file format your version of COMSOl can accept -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content