Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Variable heat capacity
Posted 30.01.2013, 12:45 GMT-5 Heat Transfer & Phase Change Version 4.3a 1 Reply
Please login with a confirmed email address before reporting spam
Hi!
I have measured Cp for metal alloy. It has significant temperature dependence. Is it possible to use Cp(T) instead of constant Cp for transient heat transfer problems?
Thanks!
I have measured Cp for metal alloy. It has significant temperature dependence. Is it possible to use Cp(T) instead of constant Cp for transient heat transfer problems?
Thanks!
1 Reply Last Post 30.01.2013, 13:13 GMT-5
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
Ccertainly, if you look carefully in the default materials there should be some with T and others even with pA dependence of the material properties.
You add an imported interpolation function (under the maerial node) to mimic your Cp(T) dependece, just be sure you get the SI units correct
When you have added your material to your model, and finme tuned it, you might save it in your own "private" material library for laer retrival
--
Good luck
Ivar
Ccertainly, if you look carefully in the default materials there should be some with T and others even with pA dependence of the material properties.
You add an imported interpolation function (under the maerial node) to mimic your Cp(T) dependece, just be sure you get the SI units correct
When you have added your material to your model, and finme tuned it, you might save it in your own "private" material library for laer retrival
--
Good luck
Ivar