Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Heat transfer in a press
Posted 11.01.2013, 07:35 GMT-5 Heat Transfer & Phase Change, Modeling Tools & Definitions, Parameters, Variables, & Functions, Studies & Solvers Version 4.3 0 Replies
Please login with a confirmed email address before reporting spam
We want to see the heat transfer in a piece of steel.
The press is made of a cold and a hot side, with between the two matrix a piece of mica to isolate those two matrix.
First we have to modelize the warm up of the press. we have made the first step with "heat transfer".
When it is finished, we put the piece of steel on the press (at 1000 K).
In the same model, we have created a second "heat transfer" to see the field of temperature of the piece. But we want to take the temperature of the first resolution as the initial values for the temperature at the interface of the press and the piece of steel.
We tried a lot of things without success.
What is the right development ?
Yours sincerely,
J.Pavageau
P.S: We can't attach the file because it's too heavy.
Hello Jérémy Pavageau
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.