Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
track velocity of inflow fluid
Posted 10.12.2012, 20:36 GMT-5 Version 4.3a 1 Reply
Please login with a confirmed email address before reporting spam
Hi all,
I have a tube which has an inlet to allow fluid to flows in. Would like to know, how can i track the velocity of inlet fluid flow when it flows inside the tube? By using particle tracking module? Any tutorial suggested?
Thanks!
I have a tube which has an inlet to allow fluid to flows in. Would like to know, how can i track the velocity of inlet fluid flow when it flows inside the tube? By using particle tracking module? Any tutorial suggested?
Thanks!
1 Reply Last Post 11.12.2012, 02:35 GMT-5
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
particle tracking gives you the displacement of a "partcile" driven by external forces, but not necessarily the "velocity" of the fluid.
Once you have a solution you can use the contour or isosurfaces to see the velocity, or a "height plot if you are in 2D.
Ypou can also use the Results Data Set cut line or cut plane (and series of lines/planes) to plot the velocity at different levels in your model space, without necesarily cutting up your geoemtry
--
Good luck
Ivar
particle tracking gives you the displacement of a "partcile" driven by external forces, but not necessarily the "velocity" of the fluid.
Once you have a solution you can use the contour or isosurfaces to see the velocity, or a "height plot if you are in 2D.
Ypou can also use the Results Data Set cut line or cut plane (and series of lines/planes) to plot the velocity at different levels in your model space, without necesarily cutting up your geoemtry
--
Good luck
Ivar