Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
study
Posted 05.12.2012, 12:25 GMT-5 Studies & Solvers 1 Reply
Please login with a confirmed email address before reporting spam
Sir,
In frequency domain study, in stationary solver there are options like automatic, linear, linearized and non'linear which is to be shown. Is there any need to change the relative tolerance value
In frequency domain study, in stationary solver there are options like automatic, linear, linearized and non'linear which is to be shown. Is there any need to change the relative tolerance value
1 Reply Last Post 05.12.2012, 14:28 GMT-5
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
I use 80-90% ofthe time the defaut settings, even I would say I start always with the default settings, it's only when the solver does not converge, and I'm convinced that nothing else than the solver tweaking is in cause, then I take a closer look to those settings
But that is my way, others that have their own ideas on which solver might be more rapid tendto tweak quicker, it's all wery model dependent
--
Good luck
Ivar
I use 80-90% ofthe time the defaut settings, even I would say I start always with the default settings, it's only when the solver does not converge, and I'm convinced that nothing else than the solver tweaking is in cause, then I take a closer look to those settings
But that is my way, others that have their own ideas on which solver might be more rapid tendto tweak quicker, it's all wery model dependent
--
Good luck
Ivar