Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
multiphase flow with moving interface combined with diffusion
Posted 15.11.2012, 16:04 GMT-5 Fluid & Heat, Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.2a 1 Reply
Please login with a confirmed email address before reporting spam
I'm working on a simulation of two droplets in air coalescing into one combined droplet in which I want to follow in time the mass transport of a species C in one droplet into the coalesced droplet. The species has to remain into the droplet phase and not diffuse into the air.
I'm using the Laminar two-phase flow (phase field) to describe the coalescing of the two droplets in air with a time dependent simulation. This part of the model is working quite well both in 2d and 3d.
Combining this model in the same study with the transport in diluted species (convection & diffusion) physics to describe the mass transport of an species C with start concentration C0 from the single one droplet into the combined coalesced droplet I run into problems.
The main problem is that the species C does not remain in droplet phase but also diffuses into the surrounding air.
In my opinion, I somehow have to use the phase field variable phipf with value=-1 to track the moving liquid-air interface to prevent the transport of the species from the droplet to the air.
Does anybody have any suggestions?
I'm using the Laminar two-phase flow (phase field) to describe the coalescing of the two droplets in air with a time dependent simulation. This part of the model is working quite well both in 2d and 3d.
Combining this model in the same study with the transport in diluted species (convection & diffusion) physics to describe the mass transport of an species C with start concentration C0 from the single one droplet into the combined coalesced droplet I run into problems.
The main problem is that the species C does not remain in droplet phase but also diffuses into the surrounding air.
In my opinion, I somehow have to use the phase field variable phipf with value=-1 to track the moving liquid-air interface to prevent the transport of the species from the droplet to the air.
Does anybody have any suggestions?
1 Reply Last Post 16.11.2012, 08:36 GMT-5
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
You can make the transport diffusion coefficient a function of the phase field variable. With a low diffusion in air the species is more likely to stay in the droplets.
Nagi Elabbasi
Veryst Engineering
Nagi Elabbasi
Veryst Engineering