Menu

Discussion Forum

New Discussion
Filtern

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Missing Infinite Element Domain

Posted 21.09.2012, 21:04 GMT-4 Version 4.3 2 Replies

Rorik Peterson
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I cannot find the Infinite element domain node, which I thought was under Definitions. I'm using the Heat Transfer in Solids in the base package. If it is not available there, where could I find it?

Attachments:

2 Replies Last Post 12.07.2013, 07:48 GMT-4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 22.09.2012, 12:48 GMT-4
Hi

there has been some changes in 4.3, to make all physics similar, I eelieve its under Global Definition ? I would have to check the doc too, anyhow, its worth to reread the doc regularly, specially when they change such issues, as the hypotheis might change too

--
Good luck
Ivar
Hi there has been some changes in 4.3, to make all physics similar, I eelieve its under Global Definition ? I would have to check the doc too, anyhow, its worth to reread the doc regularly, specially when they change such issues, as the hypotheis might change too -- Good luck Ivar
Andreas Meyer
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 12.07.2013, 07:48 GMT-4
Dear Mr Peterson,

I had the same problem: For using the infinite element domain
you need the corresponding Comsol module for _each_ used
physics interface (AC/DC for es, Microfluidics for chds...).

The base package has no infinite elements, though it is documented in there.
Dear Mr Peterson, I had the same problem: For using the infinite element domain you need the corresponding Comsol module for _each_ used physics interface (AC/DC for es, Microfluidics for chds...). The base package has no infinite elements, though it is documented in there.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content