Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Problem with selecting Multiphysics Domain/Boundary in Electromechanic Boundary Element Module
Posted 26.09.2022, 18:55 GMT-4 0 Replies
Please login with a confirmed email address before reporting spam
Hello,
I am trying to use Electromechanic Boundary Element for finding the vertical displacemnt of a cantilever (horizontal beam named as Electrode 2 (middle electrod)), due to electrostatic force of two fixed vertical Electrodes (Electrode 1 and 3) in a stationary step.
The fixed electrodes 1 and 3 have the Voltage of V=0 volte and the cantilever (Electrode 2)'s voltage sweeping through different numbers. Also there is a constant pressure applided on the cantilever(Electrode 2).
All the geometries are selected for Electrostatic Boundary Element Domain.
Electrod 2(Cantiever) is also selected for Solid Solid Mechanics domain.
The problem is that I cannot select any domain or boundary for the Electromechaical Interface (Multiphysics).
I have attached the model here. Please help. Thank you
Attachments:
Hello Johar Pourghader
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.