Menu

Discussion Forum

New Discussion
Filtern

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Thermal-flow Inside a Petroleum Coke Rotary Calcining Kiln

Posted 14.07.2012, 00:16 GMT-4 Fluid & Heat, Heat Transfer & Phase Change, Computational Fluid Dynamics (CFD), Chemical Reaction Engineering, Materials, Mesh, Parameters, Variables, & Functions, Studies & Solvers Version 4.0 5 Replies

David
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

hi friens
I need to simulate a combustion of methane in a rotary kiln
I want to find Thermal-flow Inside a Petroleum Coke Rotary Calcining Kiln
Can help me
I dont Know how I can inter my Combustion model
and reactions....
thanks....
5 Replies Last Post 28.07.2012, 20:32 GMT-4
Tero Hietanen
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 14.07.2012, 10:08 GMT-4
Hi,

Check following thread:

www.comsol.com/community/forums/general/thread/23717/

Best regards

Tero
Hi, Check following thread: http://www.comsol.com/community/forums/general/thread/23717/ Best regards Tero
David
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 14.07.2012, 22:14 GMT-4
thank you Tero
I will study that posts.
but I have a Problem with my COMSOL error
and I dont Understand them.
so how I tell my Problem there?
I attached these files.
thank you Tero I will study that posts. but I have a Problem with my COMSOL error and I dont Understand them. so how I tell my Problem there? I attached these files.
David
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 14.07.2012, 22:17 GMT-4

thank you Tero
I will study that posts.
but I have a Problem with my COMSOL error
and I dont Understand them.
so how I tell my Problem there?
I attached these files.

best regard

[QUOTE] thank you Tero I will study that posts. but I have a Problem with my COMSOL error and I dont Understand them. so how I tell my Problem there? I attached these files. [/QUOTE] best regard

Attachments:

Tero Hietanen
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 15.07.2012, 03:20 GMT-4
Hi,

I couldn't open your file because I don't have license for Chemical Reaction Module. I have done my work by adding needed reactions to Comsol CFD-module. Sorry, I cannot help you.

Best regards

Tero
Hi, I couldn't open your file because I don't have license for Chemical Reaction Module. I have done my work by adding needed reactions to Comsol CFD-module. Sorry, I cannot help you. Best regards Tero
David
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 28.07.2012, 20:32 GMT-4
Hello Dear Hero
O no.
not at all
thanks alot
you help me great
thanks alot.


best regard,
hero, what is your major?
if you graduated from university...
which university?

really thanks....
Hello Dear Hero O no. not at all thanks alot you help me great thanks alot. best regard, hero, what is your major? if you graduated from university... which university? really thanks....

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content