Menu

Discussion Forum

New Discussion
Filtern

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Converting 3D model into 2D-axisymmetry

Posted 11.07.2012, 09:38 GMT-4 Interfacing, Geometry Version 4.3 2 Replies

Chloe Wu
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I am importing a 3D SolidWorks file into COMSOL. But because my SolidWorks version is 2009, I cannot use the LiveLink interface. So I change the file into Parasolid format and import it directly into COMSOL. I am using 4.3

My problem is how can I convert my original 3D model into 2D-axisymmetry in COMSOL?

Thank you!
2 Replies Last Post 11.07.2012, 12:42 GMT-4
John H.
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 11.07.2012, 11:35 GMT-4
I don't think you can do that with Comsol. But why not perform the projection in SolidWorks and then export the result in a 2d format, such as DXF?
I don't think you can do that with Comsol. But why not perform the projection in SolidWorks and then export the result in a 2d format, such as DXF?
Chloe Wu
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 11.07.2012, 12:42 GMT-4
Thank you!
Thank you!

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content