Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
lamp heating simulation
Posted 10.07.2012, 05:39 GMT-4 Heat Transfer & Phase Change, Results & Visualization Version 4.2a 1 Reply
Please login with a confirmed email address before reporting spam
Hi.
I am trying to simulate the heating of a piece of glass due to the action of a lamp made of a array of 7x7 leds. The piece of glass it is under 50 mm from the lamp.
This is to compare with experimental data.
To do it, I have been used the model called "rapid thermal annealing" of the model library as a guide.
In the solutions I can see the evolution of the temperature in the lamp, but the piece of glass is always at the same temperature (initial T). It is like if the lamp does not heat the glass.
I need to know where could be my error building this model. Could someone help me?
Thanks.
I am trying to simulate the heating of a piece of glass due to the action of a lamp made of a array of 7x7 leds. The piece of glass it is under 50 mm from the lamp.
This is to compare with experimental data.
To do it, I have been used the model called "rapid thermal annealing" of the model library as a guide.
In the solutions I can see the evolution of the temperature in the lamp, but the piece of glass is always at the same temperature (initial T). It is like if the lamp does not heat the glass.
I need to know where could be my error building this model. Could someone help me?
Thanks.
1 Reply Last Post 10.07.2012, 11:00 GMT-4