Menu

Discussion Forum

New Discussion
Filtern

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Can I add the brine solution (salt water) as material in solid mechanics in comsol?

Posted 30.07.2021, 02:30 GMT-4 1 Reply

Malgorzata Wojcik, PhD The CHEMKOP Company
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello, Can I add the brine solution (salt water) as material in solid mechanics in comsol? Małgorzata

1 Reply Last Post 30.07.2021, 12:07 GMT-4
Dave Greve
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 3 years ago 30.07.2021, 12:07 GMT-4

If you have solid mechanics you also have the basic pressure acoustics (acpr) module. This module can be linked to solid mechanics to model waves in the liquid.

Or you can model materials with Poisson ratio near 0.5 within solid mechanics provided you select the pressure formulation under Linear Elastic Material > use mixed formulation.

You will need to look up and enter the necessary material parameters for salt water (probably not very different from pure water).

If you have solid mechanics you also have the basic pressure acoustics (acpr) module. This module can be linked to solid mechanics to model waves in the liquid. Or you can model materials with Poisson ratio near 0.5 within solid mechanics provided you select the pressure formulation under Linear Elastic Material > use mixed formulation. You will need to look up and enter the necessary material parameters for salt water (probably not very different from pure water).

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content