Menu

Discussion Forum

New Discussion
Filtern

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

fiber

Posted 20.05.2012, 07:36 GMT-4 RF & Microwave Engineering Version 4.2 4 Replies

Deepak Jain
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

a

Attachments:

4 Replies Last Post 17.12.2012, 14:31 GMT-5
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 20.05.2012, 09:14 GMT-4
Hi

I suspect its your .r^2 .r I assume you mean *r^2 and *r, no ?

--
Good luck
Ivar
Hi I suspect its your .r^2 .r I assume you mean *r^2 and *r, no ? -- Good luck Ivar
Deepak Jain
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 20.05.2012, 09:53 GMT-4
yes Ivar its *r. Moreover I should use d(Ez,r) for differentiation. i have changed this but i get zero answer. probably its not understanding radial derivative. whats the way to implement that.

thanks
Deepak
yes Ivar its *r. Moreover I should use d(Ez,r) for differentiation. i have changed this but i get zero answer. probably its not understanding radial derivative. whats the way to implement that. thanks Deepak
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 20.05.2012, 10:40 GMT-4
Hi

you need to write out the cylindrical coordinate differential from the x and y derivatives. By the way normally you have alread Exx and Exy ... defined

you can define a cylindrical coordinate system to express your sys2.r

Unfortunately COMSOL does not understand d(Ex,sys2.r)

You could also then consider using a higher discretization order to try to get smoother results

--
Good luck
Ivar
Hi you need to write out the cylindrical coordinate differential from the x and y derivatives. By the way normally you have alread Exx and Exy ... defined you can define a cylindrical coordinate system to express your sys2.r Unfortunately COMSOL does not understand d(Ex,sys2.r) You could also then consider using a higher discretization order to try to get smoother results -- Good luck Ivar
Md. Selim Habib
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 17.12.2012, 14:31 GMT-5
Could u give me the file on bending fiber in v 4.2.
Thanks in advance.
Could u give me the file on bending fiber in v 4.2. Thanks in advance.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content