Menu

Discussion Forum

New Discussion
Filtern

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Why is one of my parts disappearing in the results section

Posted 06.04.2021, 10:52 GMT-4 Electromagnetics, Low-Frequency Electromagnetics, Studies & Solvers Version 5.6 2 Replies

Butterbrot Electrical Engineering
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I want to simulate a cupper pipe between a Helmholtz coil pair. While looking in the component section both pipe and coils have been modelled and meshed, in the results section there is only the two coils left; the pipe disappeared. Sorry, I'm fairly new to this software and are probably missing out on some basics.

Attachments:

2 Replies Last Post 06.04.2021, 12:46 GMT-4
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 4 years ago 06.04.2021, 11:48 GMT-4

Hi,

the dataset has a selection that isn't including the pipe.

Cheers Edgar

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Hi, the dataset has a selection that isn't including the pipe. Cheers Edgar
Butterbrot Electrical Engineering
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 4 years ago 06.04.2021, 12:46 GMT-4

Hi,

the dataset has a selection that isn't including the pipe.

Cheers Edgar

Thanks! That helped

>Hi, > >the dataset has a selection that isn't including the pipe. > >Cheers >Edgar Thanks! That helped

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content