Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
comparision of capacitive pressure senor and piezoelectric pressure sensor
Posted 20.04.2012, 07:16 GMT-4 Computational Fluid Dynamics (CFD), Geometry, Materials, Mesh, Modeling Tools & Definitions, Parameters, Variables, & Functions, Results & Visualization, Studies & Solvers Version 4.2a 2 Replies
Please login with a confirmed email address before reporting spam
Please login with a confirmed email address before reporting spam
that hears like an interesting project, but before you start to model, you should perhaps try to sketch out the two solutions, define the different variables you want to play with, interfaces between the physics you intend to use and the dependent variables you need, then define the criteria you might decide to use a "juge" for the "est" solution.
Thereafter I believe it will be easier to start modelling, as you will have a better idea of which physics to use for which model, where are the"important" and dependent variables etc.
In anycase, my advice start simple one physics at a time and build your models layer by layer and physics by physcs
--
Good luck
Ivar
Please login with a confirmed email address before reporting spam