Menu

Discussion Forum

New Discussion
Filtern

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Defining single domain as 2 materials

Posted 04.04.2012, 15:33 GMT-4 Materials Version 4.2a 1 Reply

Natalie Schloeder
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

We are looking to define a single domain as a percentage of 2 different materials; is this possible within Comsol? We have a multi-turn coil domain that we are looking to designate as 80% copper and 20 % fiberglass insulation.
1 Reply Last Post 08.05.2013, 07:03 GMT-4
COMSOL Moderator

Hello Natalie Schloeder

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

akmal
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 08.05.2013, 07:03 GMT-4
hi,

i have the same matter. a combination between air and non-air porous matrix can be used. but between non-air and non-air no.

i'm using agari-uno formula to calculate thermal conductivity on copper-epoxy mix.

regards
akmal
hi, i have the same matter. a combination between air and non-air porous matrix can be used. but between non-air and non-air no. i'm using agari-uno formula to calculate thermal conductivity on copper-epoxy mix. regards akmal

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content