Menu

Discussion Forum

New Discussion
Filtern

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Relative Permittivity has no effect?

Posted 13.03.2012, 22:13 GMT-4 3 Replies

Christopher Scott
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

How come I see no change in the electric field when changing the relative permittivity of the material between and surrounding the parallel plate capacitor in the attached example?

Thanks

Attachments:

3 Replies Last Post 14.03.2012, 14:28 GMT-4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 14.03.2012, 02:41 GMT-4
Hi

because the electrioc field will not change, the capacitance yes (and it does, try to give er=1000 and solve and integrate your capacity variable

You need to add a second material in between the electrodes and change one of the two Er to see any true change in electric fields

--
Good luck
Ivar
Hi because the electrioc field will not change, the capacitance yes (and it does, try to give er=1000 and solve and integrate your capacity variable You need to add a second material in between the electrodes and change one of the two Er to see any true change in electric fields -- Good luck Ivar
Christopher Scott
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 14.03.2012, 11:19 GMT-4
So are you saying that Comsol isn't giving me the Eeffective = E-Epolarization but only E, where Epolarization is due to the dielectric?

Thanks
So are you saying that Comsol isn't giving me the Eeffective = E-Epolarization but only E, where Epolarization is due to the dielectric? Thanks
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 14.03.2012, 14:28 GMT-4
Hi

you are right, I was a bit too quick, there I you look at "V" the way you have made your model. There you will not see any rainbow color change for V with er=1 or er = 1000 for the air.

But if you look at D or E (vector components), you will notice a difference in your model by changing the er of air, there we agree and COMSOL is calculating correctly ;)

If you add a domain in part of the air gap height and change the "er" of this domain, then you will also notice the change in the V value in the gap

--
Good luck
Ivar
Hi you are right, I was a bit too quick, there I you look at "V" the way you have made your model. There you will not see any rainbow color change for V with er=1 or er = 1000 for the air. But if you look at D or E (vector components), you will notice a difference in your model by changing the er of air, there we agree and COMSOL is calculating correctly ;) If you add a domain in part of the air gap height and change the "er" of this domain, then you will also notice the change in the V value in the gap -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content