Menu

Discussion Forum

New Discussion
Filtern

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Model Coupling

Posted 01.03.2012, 18:19 GMT-5 Version 4.2a 1 Reply

COMSOL user2
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I have 3D mixer using microchannel. Since the real device would be much longer than what I did in simulation, I would like to use something like "model coupling" to use the previous output of microchannel as the new input of the same channel. What am I supposed to do? Is there any other tutorials beyond "Submodel in a Wheel Rim"?

Thanks.
1 Reply Last Post 02.03.2012, 01:06 GMT-5
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 02.03.2012, 01:06 GMT-5
Hi

check the doc about periodic boundaries and pairs

--
Good luck
Ivar
Hi check the doc about periodic boundaries and pairs -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content