Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
COMSOL expression evaluation
Posted 09.02.2012, 21:03 GMT-5 Parameters, Variables, & Functions Version 4.3 4 Replies
Please login with a confirmed email address before reporting spam
In COMSOL I am using two expressions to calculate a certain parameter, and the objective is to pick the one that under given conditions gives a result, which is a real number and 0<=x<=1). I can easily plug a MATLAB routine to do the assesment and pick the value calculated from either of the two expressions, but I always consider the use of MATLAB from COMSOL as last resort, so maybe there is a way to do it with some smart formula in COMSOL?
Any help will be very much appreciated,
Mike
Please login with a confirmed email address before reporting spam
you could try to use boolean expressions, like
x*(x>=0 & x<=1) This would result in the value of x between 0 and 1 and 0 elsewhere.
Cheers
Edgar
Please login with a confirmed email address before reporting spam
Cheers, M.
Please login with a confirmed email address before reporting spam
Is it x*(x>=0 & x<=1) OR x*(x>=0 && x<=1) ?
Please login with a confirmed email address before reporting spam
have you read te help on "Special Operators" and "Unary and Binary Operators"
seem to go more towards && and || in COMSOL;)
--
Good luck
Ivar