Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Splitting up an imported geometry into different domains
Posted 27.01.2012, 09:08 GMT-5 Geometry Version 4.2a, Version 4.3b 2 Replies
Please login with a confirmed email address before reporting spam
Is it possible to import a geometry from a CAD file into Comsol in such a way that it contains more than 1 domain?
Till now I made all my geometries in comsol itself. But now I need to make a more complex geometry that contains different materials herefor the geometry needs to be more than 1 domain.
Till now I made all my geometries in comsol itself. But now I need to make a more complex geometry that contains different materials herefor the geometry needs to be more than 1 domain.
2 Replies Last Post 28.01.2014, 16:10 GMT-5
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
if you import an CAD assembly made of different parts, you become different domains in COMSOL.
In some situation you can manage to import a CAD geometrey and modify it in COMSOL (sub divide it) but I prefer always to do that in my SW CAD programme
--
Good luck
Ivar
if you import an CAD assembly made of different parts, you become different domains in COMSOL.
In some situation you can manage to import a CAD geometrey and modify it in COMSOL (sub divide it) but I prefer always to do that in my SW CAD programme
--
Good luck
Ivar
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
So you typically import assembly files instead of parts?