Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Convergence issues of 3D Coupled hydromechanical model for porous media
Posted 12.10.2019, 15:22 GMT-4 Version 5.4 0 Replies
Please login with a confirmed email address before reporting spam
Dear all,
The coupled HM model I developed for porous media ran very well for 2D problem, but always encountered convergence issue for 3D problem. I have found the cause of this issue, which results from the rate of volumetric strain in the mass source term, i.e. "-eps_f×Cp×p_wt×Ing.rho-S_nw×Ing.rho×d(solid.evol,TIME)". Sometimes, an error "Failed to find consistent initial values. Last time step is not converged." pops up. Also, I found there were some singularities in the domain. However, I still can't find a solution to this issue. Could someone help me about it?
Thanks a lot for your help.
-------------------Yu Zhang
Hello Yu Zhang
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.