Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Inversed sign in electric field of port.
Posted 06.06.2019, 08:45 GMT-4 RF & Microwave Engineering Version 4.3 0 Replies
Please login with a confirmed email address before reporting spam
Hello to all
For verification purposes I'm simulating a interface between glass and vacuum. For the port in vacuum with wave input I define my electric fields as follows: E=(E0cos(alpha)exp(-i(kaxx+kayy)), -E0sin(alpha)exp(-i(kaxx+kayy)), 0), where E0=1V/m, kax=emw.k0sin(alpha), kay=k0cos(alpha).
For the output port in glass I would like to define E=(E0cos(beta)exp(-i(kaxx+kayy)), -E0sin(beta)exp(-i(kbxx+kbyy)), 0) where again E0=1V/m, kax=emw.k0*sin(beta).
But inexplicably, this is not consisten with the analytical solution. But with the following electric field for the output port it gives the correct solution: E=(E0cos(beta)exp(-i(kaxx+kayy)), E0sin(beta)exp(-i(kbxx+kbyy)), 0), where I have changed the sign in the y-component. Why do I have to change this sign?
(Im using floquet boundaries with (kax, kay), 2D model)
Hello Marcel Stucki
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.