Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Regarding integral forms
Posted 13.10.2011, 23:04 GMT-4 RF & Microwave Engineering Version 4.0a, Version 4.2 1 Reply
Please login with a confirmed email address before reporting spam
I would like to do some calculations using the results from surface integration.
Can I introduce the following function(or equation) to COMSOL?
For instance:
gamma = k0*(integral integral [n2(x,y)*|emw|^4] dx dy / (integral integral |emw|^2 dx dy)^2
k0 : wave number
n2(x,y) : non-linear refractive index
|emw| : magnitude of electric field
When there are the square form of the emw, other parameter in the integral result, it is difficult in calculating those expression.
Thanks,
Yong-soo Kim.
Can I introduce the following function(or equation) to COMSOL?
For instance:
gamma = k0*(integral integral [n2(x,y)*|emw|^4] dx dy / (integral integral |emw|^2 dx dy)^2
k0 : wave number
n2(x,y) : non-linear refractive index
|emw| : magnitude of electric field
When there are the square form of the emw, other parameter in the integral result, it is difficult in calculating those expression.
Thanks,
Yong-soo Kim.
1 Reply Last Post 14.10.2011, 02:08 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
I found a clue that would lead to the solution of the problem.
In COMSOL 4.0a or 4.2, Results-Derived Values-Integration-Surface Integration-Selection(Some Domain)-Expression(2.48e-20[m^2/W]*abs(emw.normE)^4)-Evaluate-New Table.
==========================================================================================
gamma = k0*(integral integral [n2(x,y)*|emw|^4] dx dy / (integral integral |emw|^2 dx dy)^2
k0 : wave number
n2(x,y) : non-linear refractive index
|emw| : magnitude of electric field
==========================================================================================
I have obtained some value of the results, now I'm verifying those values.
But there was one problem. 'x', 'y' are the parameter as width, height of the core of the optical waveguide,respectively. I adjust the 'x', 'y' from '4um', '2um' to '16um', '4.5um', and I plot the results as contour plot.(In other words, 'x', 'y' are parameterized as width, height of the core, and then plotted the contour of the integral results)
In COMSOL 4.0a or 4.2, Results-Derived Values-Integration-Surface Integration-Selection(Some Domain)-Expression(2.48e-20[m^2/W]*abs(emw.normE)^4)-Evaluate-New Table.
==========================================================================================
gamma = k0*(integral integral [n2(x,y)*|emw|^4] dx dy / (integral integral |emw|^2 dx dy)^2
k0 : wave number
n2(x,y) : non-linear refractive index
|emw| : magnitude of electric field
==========================================================================================
I have obtained some value of the results, now I'm verifying those values.
But there was one problem. 'x', 'y' are the parameter as width, height of the core of the optical waveguide,respectively. I adjust the 'x', 'y' from '4um', '2um' to '16um', '4.5um', and I plot the results as contour plot.(In other words, 'x', 'y' are parameterized as width, height of the core, and then plotted the contour of the integral results)