Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
boundary conditions for hydrodynamic instability?
Posted 17.09.2011, 02:58 GMT-4 Computational Fluid Dynamics (CFD) Version 4.2 0 Replies
Please login with a confirmed email address before reporting spam
Hi
Consider a non-compressible fluid column in 2D axisymmetry (laminar flow,moving mesh). A sinusuodial disturbance is excited along the z axis (by a volume force short pulse) F=F1*sin(2*pi*z/a)*(r/a) a is the column radius
The velocities u and w from the laminar physics are plugged into the prescribed boundary velocities of the moving mesh and that works OK with an open boundary at r=a
How can I set the boundary conditions at Z=0 and Z=L so that the model simulates an infinite column without "edge effects" from the boundaries? (L is the column length)
So far the model runs with no-slip walls but the disturbance weakens rapidly near the top and bottom boundaries.
I've tried symmetry and periodic flow with no success. I've tried both the options of zero and maximum of the disturbance at the boundaries.
There is no background flow in the z direction though there is a periodic z flow due to the disturbance.
Thanks
David
Hello David Segal
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.