Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to plot a 1D graph using a Custom line?
Posted 20.08.2011, 11:12 GMT-4 Geometry, Results & Visualization Version 4.1 2 Replies
Please login with a confirmed email address before reporting spam
I'm using COMSOL 4.1 to solve a heat transfer problem and i've solved it successfully the problem is that i need to get a 1D Graph at different locations on the surface of the substrate.
I Could only do this by splitting the substrate into two parts and using the separating edge as an input for the plot.
but i need to get readings at much different places any solution to this?
The image illustrates the problem, i want for example to plot using the red line drawn on the substrate and not using a pre-done edge.
any help?
thanks
Attachments:
Please login with a confirmed email address before reporting spam
try a right click on the "Data Sets" and add a "line", then create a line plot attached to the new data set
--
Good luck
Ivar
Please login with a confirmed email address before reporting spam