Menu

Discussion Forum

New Discussion
Filtern

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

FSI using beam elements

Posted 28.04.2011, 14:56 GMT-4 MEMS & Nanotechnology, MEMS & Piezoelectric Devices, Structural Mechanics 1 Reply

Prithivirajan Veerappan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

i have done FSI using 2d elements(plain strain)......


but..
i need to do an FSI with beam element?

can somebody give me some suggestions?


prithivi
1 Reply Last Post 28.04.2011, 16:16 GMT-4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 28.04.2011, 16:16 GMT-4
Hi

not really, as for 2D/3D the Boundaries reflect the true areas interacting with the fluid, while in Beam physics, the lines have thickness and width, so this geometrical information must be added to the equations, but what else ?

--
Good luck
Ivar
Hi not really, as for 2D/3D the Boundaries reflect the true areas interacting with the fluid, while in Beam physics, the lines have thickness and width, so this geometrical information must be added to the equations, but what else ? -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content