Menu

Discussion Forum

New Discussion
Filtern

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

TEC Modeling

Posted 11.04.2018, 23:52 GMT-4 Electromagnetics, Modeling Tools & Definitions Version 5.3a 1 Reply

Andrew Castro
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I have a TEC1-12706 peltier that has a max current rating of 6A (12V). It has 127 thermocouple pairs (connected in series electrically and parallel thermally). I was wondering how to model this plate on comsol?

I have already constructed the geometry with the appropriate material. I know I need to specify certain conditions in Electric Currents module. I have tried specifying the electrical potential at one end as 12V and have the ground at the other end. This did not converge.

Any suggestion helps! Thanks!

1 Reply Last Post 12.04.2018, 09:05 GMT-4
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 7 years ago 12.04.2018, 09:05 GMT-4

Go to File > Licensed and Used Products, and check if your license includes the "Heat Transfer Module". That product has a ready-made interface for the thermoelectric effect.

This video covers it: https://www.comsol.com/video/simulate-thermoelectric-devices-tecs

See also this blog: https://www.comsol.com/blogs/how-to-analyze-thermoelectric-cooler-designs-with-a-comsol-app/

Finally, here is a basic tutorial: https://www.comsol.com/model/thermoelectric-leg-16365

Best,

Jeff

-------------------
Jeff Hiller
Go to File > Licensed and Used Products, and check if your license includes the "Heat Transfer Module". That product has a ready-made interface for the thermoelectric effect. This video covers it: https://www.comsol.com/video/simulate-thermoelectric-devices-tecs See also this blog: https://www.comsol.com/blogs/how-to-analyze-thermoelectric-cooler-designs-with-a-comsol-app/ Finally, here is a basic tutorial: https://www.comsol.com/model/thermoelectric-leg-16365 Best, Jeff

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content