Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

how should we change the interior boundary into normal one?

Please login with a confirmed email address before reporting spam

Hi,

I am working on a CFD model with 2D, I has a geometry within an rectangle because the surrounding environment is necessary.

The problem comes out. I want to apply inlet and outlet on the inside geometry, while all these boundaries are not applicable except continuation. I search relative topics in this discussion forum, one way is that using assembly mode. But it is only useful for CAD import.

Is there any one have ways to solve this problem?
By the way, I use version4.1.

Thanks a lot!!!


2 Replies Last Post 26.04.2011, 11:06 GMT-4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 16.04.2011, 01:00 GMT-4
Hi

if you have a fluid domain, the inlets and outlets are by definition external boundaries to the fluid. Matter cannot apear in the middle of nowhere,or ?

if you have a multiphysics model with solid, with fluids and other items you can define that only a part of your geoemtry is for the fluid, part for the solid etc. Then an "interiour" boundary of the full model, becomes an external boundary for the fluid.

This is basic physics and not a COMSOL artefact. With COMSOL you should always "think physics"

--
Good luck
Ivar
Hi if you have a fluid domain, the inlets and outlets are by definition external boundaries to the fluid. Matter cannot apear in the middle of nowhere,or ? if you have a multiphysics model with solid, with fluids and other items you can define that only a part of your geoemtry is for the fluid, part for the solid etc. Then an "interiour" boundary of the full model, becomes an external boundary for the fluid. This is basic physics and not a COMSOL artefact. With COMSOL you should always "think physics" -- Good luck Ivar

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 26.04.2011, 11:06 GMT-4
Hi Ivar,

Thank you very much!
Hi Ivar, Thank you very much!

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.