Menu

Discussion Forum

New Discussion
Filtern

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to define a boundary condition which varies within a given domain

Posted 08.04.2011, 11:51 GMT-4 Geometry, Modeling Tools & Definitions, Parameters, Variables, & Functions, Studies & Solvers Version 4.1 3 Replies

Chin Kin Ong
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I am trying to solve the Poisson's Equation. To simplify the problem, it is a 1-D problem, where the domain is 0 < x < 1

the Poisson's equation defined that d^2u/dx^2 = K where K = constant.

the boundary condition which I have is u(x=0) = u0
and du/dx = 0 when x = x1

While x1 is between 0 and 1 which is yet an unknown.

Is it possible to define such a system ?

Thank you.

Best regards,
Chin Kin
3 Replies Last Post 08.04.2011, 16:43 GMT-4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 08.04.2011, 15:42 GMT-4
Hi

if I count right, I find 3 DoFs and 2 boundary conditions, hence you have an infinite number of solutions and such a system cannot be solved by COMSOL as it wants a fully defined BVP, if you decide a value for your "x1", I believe it should work.

What you can do is to scan x1 from 0 to 1 (just check that if x1==0 or x1==1 you do not have a degeneracy)

--
Good luck
Ivar
Hi if I count right, I find 3 DoFs and 2 boundary conditions, hence you have an infinite number of solutions and such a system cannot be solved by COMSOL as it wants a fully defined BVP, if you decide a value for your "x1", I believe it should work. What you can do is to scan x1 from 0 to 1 (just check that if x1==0 or x1==1 you do not have a degeneracy) -- Good luck Ivar
Chin Kin Ong
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 08.04.2011, 15:55 GMT-4
Hi Ivar,
Thanks for your reply. I'm sorry I missed out another boundary condition which is

u(x1) = 0

I still didn't manage to define this system.
Please help. Thanks

Best regards,
Chin Kin
Hi Ivar, Thanks for your reply. I'm sorry I missed out another boundary condition which is u(x1) = 0 I still didn't manage to define this system. Please help. Thanks Best regards, Chin Kin
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 08.04.2011, 16:43 GMT-4
Hi

Well in the new V4 COMSOL is somewhat more restrictive (if I remember right from 3.5) I see that it enforces two "zero Flux", one on each side on the external boundaries, so if I decide arbitrary to set X1=0.75 for a test and let u0 scan from -1 to 1 you get a solution per u0, as well as an unique solution on the domain 2 because you have the zero flux on the right boundary (if not defining something else).

But I'm not sure I got the full story here ;)

If you change the mesh from extremely coarse to extremely fine, you will see that the domain 2 has an unique solution for any u0, to the numerical precision via the relative mesh quality

--
Good luck
Ivar
Hi Well in the new V4 COMSOL is somewhat more restrictive (if I remember right from 3.5) I see that it enforces two "zero Flux", one on each side on the external boundaries, so if I decide arbitrary to set X1=0.75 for a test and let u0 scan from -1 to 1 you get a solution per u0, as well as an unique solution on the domain 2 because you have the zero flux on the right boundary (if not defining something else). But I'm not sure I got the full story here ;) If you change the mesh from extremely coarse to extremely fine, you will see that the domain 2 has an unique solution for any u0, to the numerical precision via the relative mesh quality -- Good luck Ivar

Attachments:

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content