Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Equation based solution of system of PDEs. Example sought after.
Posted 23.10.2017, 04:34 GMT-4 General, Chemical Reaction Engineering, Electrochemistry Version 5.2a 1 Reply
Please login with a confirmed email address before reporting spam
The below post is related to an archived discussion
Hi, the cited reference to the Black-Scholes equation provided me with helpful introduction to using equation based modelling. However I would also like to study an example, - if any exist, - on how to implement a system of PDEs. More specifically I have a system of time-dependent DE derived from a model of a chemical sensor. The concentrations of many species, up to 10, are described by those equations, and and wnat to set up a time-dependent solution. It would be nice to be able to follow an example though. Any directions greatly appreciated. Regards Poul Ravn Sørensen Radiometer Medical ApS
Please login with a confirmed email address before reporting spam
Hello Poul Ravn,
When you have multiple variables involved in your own equations, you're often better off setting them up in a single physics interface than in separate ones. A couple of example with two variables (and two equations) are here: https://www.comsol.com/model/the-shallow-water-equations-202 https://www.comsol.com/model/electrical-signals-in-a-heart-981
But if it is chemical reactions that you are trying to model, you may want to look into the Chemical Reaction Engineering Module ( https://www.comsol.com/chemical-reaction-engineering-module ) as well, as it includes ready-to-use interfaces for this that will make your life much easier, especially when you are talking about 10 species.
Best, Jeff
-------------------Jeff Hiller