Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to measure power in COMSOL wave optics?
Posted 19.10.2017, 12:39 GMT-4 Wave Optics Version 5.2a 1 Reply
Please login with a confirmed email address before reporting spam
Hi all,
I'm wondering if anyone knows how to measure the power in COMSOL wave optics, for example the power coming out of from a line in a case of 2D simulation.
I've seen in a video on Youtube where the lecturer integrated the 'sqrt(ewfd.Poavx^2+ewfd.Poavy^2+ewfd.Poavz^2)' value along a line to represent the power. However, the software also provides a value called 'ewfd.nPoav'. I'm confused which one is the correct one to use since they sometimes actually give different results. I tried to test these two methods by checking, for example, the power at the input side and output side of a slab waveguide, but the power I measured at the input and the output do not agree with each other. Does anyone know the correct way to measure the power? Many thanks in advance.
Please login with a confirmed email address before reporting spam
The ewfd.nPoav variable refers to the component of the average power that is "normal" to (aka, perpendicular to) a particular surface. It is thus not the same as the "norm" or magnitude, of the vector, in general. This is why you get a different answer from using the longer expression.
-------------------Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara